Dell Networking 7048, Справочное руководство

Страница: 1335 / 1788

Virtual Router Redundancy Protocol Commands
1335
User Guidelines
This command accepts any printable characters for the name. Descriptions
containing spaces must be wrapped with quotes.
Example
The following example creates virtual router group 5 on VLAN 15 and
configures its description.
console(config)#interface vlan 15
console(config-if-vlan15)#vrrp 5
console(config-if-vlan15)#vrrp 5 description “Sales and Marketing”
vrrp ip
Use the vrrp ip command in Interface Configuration mode to enable VRRP
and set the virtual router IP address value for an interface. Use the no form of
the command remove the secondary IP address. It is not possible to remove
the primary IP address once assigned. Remove the VRRP group instead.
Syntax
vrrp
group
ip
ip-address
[ secondary ]
no vrrp
group
ip
ip-address
vlan secondary
Syntax Description
Default Configuration
VRRP is not configured on the interface.
Command Mode
Interface Configuration (VLAN) mode.
Parameter Description
group The virtual router identifier. (Range: 1-255)
ip-address The IP address of the virtual router.
secondary Designates the virtual router IP address as a secondary IP
address on an interface.
2CSPC4.X7000-SWUM204.book Page 1335 Friday, March 15, 2013 8:22 AM