Dell Inspiron One 2305 Скачать руководство пользователя страница 39

Страница: 39 / 96

Infrared Blaster Connector: Dell Inspiron One 2305/2310 Service Manual

file:///T|/htdocs/systems/InsOne2310/sr/sm/ir.htm[7/25/2012 10:24:52 AM]

Back to Contents Page

Infrared Blaster Connector

Dell™ Inspiron™ One 2305/2310 Service Manual

Removing the Infrared (IR) Blaster Connector

Replacing the Infrared (IR) Blaster Connector

WARNING:

Before working inside your computer, read the safety information that shipped with your

computer. For additional safety best practices information, see the Regulatory Compliance Homepage at

www.dell.com/regulatory_compliance.

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to

servicing that is not authorized by Dell™ is not covered by your warranty.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by

periodically touching an unpainted metal surface (such as a connector on your computer).

Removing the Infrared (IR) Blaster Connector

1. Follow the instructions in

Before You Begin

2. Remove the back cover (see

Removing the Back Cover

3. Follow the instructions from

step 2

step 5

Removing the Front Stand

4. Follow the instructions from

step 4

step 8

Removing the System-Board Shield

5. Remove the nut that secures the infrared (IR) blaster to the system-board shield.

6. Release the IR blaster connector from the slot on the system-board shield.

7. Lift the IR blaster connector along with its cable away from the system-board shield.

IR blaster connector

nut

Replacing the Infrared (IR) Blaster Connector

Содержание Inspiron One 2305

































































































Результаты поиска

Содержание Inspiron One 2305

Отзывы:

Похожие инструкции для Inspiron One 2305

Бренды по названию

Популярные бренды

Dell Inspiron One 2305, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron One 2305

Отзывы:

Похожие инструкции для Inspiron One 2305

Бренды по названию

Популярные бренды