Dell Inspiron One 2305 Скачать руководство пользователя страница 49

Страница: 49 / 96

Wireless Mini-Card(s): Dell Inspiron One 2305/2310 Service Manual

file:///T|/htdocs/systems/InsOne2310/sr/sm/cards.htm[7/25/2012 10:24:54 AM]

Mini-Card

system board connector

screws (2)

Replacing the Mini-Card(s)

CAUTION:

The connectors are keyed to ensure correct insertion. Use of excessive force may damage the

connectors.

CAUTION:

To avoid damage to the Mini-Card, ensure that there are no cables or antenna cables under the

Mini-Card.

1. Follow the instructions in

Before You Begin

2. Align the notch on the Mini-Card with the tab in the system-board connector.

3. Insert the Mini-Card at a 45-degree angle into the system-board connector.

4. Press the other end of the Mini-Card down and replace the two screws that secure the Mini-Card to the system-board

connector.

5. Connect the appropriate antenna cable(s) to the Mini-Card you are installing. The following table provides the antenna

cable color scheme for the Mini-Card(s) supported by your computer.

Connectors on the Mini-Card Antenna Cable Color Scheme
WLAN (2 antenna cables)

Main WLAN (white triangle)

Auxiliary WLAN (black triangle)

white

black

TV tuner

(1 antenna cable)

black

6. Replace the system-board shield (see

Replacing the System-Board Shield

7. Follow the instructions from

step 4

step 5

Replacing the Front Stand

8. Replace the back cover (see

Replacing the Back Cover

CAUTION:

Before turning on the computer, replace all screws and ensure that no stray screws remain

inside the computer. Failure to do so may result in damage to the computer.

9. Connect your computer and all attached devices to electrical outlets, and turn them on.

Back to Contents Page

Содержание Inspiron One 2305

































































































Результаты поиска

Содержание Inspiron One 2305

Отзывы:

Похожие инструкции для Inspiron One 2305

Бренды по названию

Популярные бренды

Dell Inspiron One 2305, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron One 2305

Отзывы:

Похожие инструкции для Inspiron One 2305

Бренды по названию

Популярные бренды