Dell Inspiron One 2305 Скачать руководство пользователя страница 83

Страница: 83 / 96

Display: Dell Inspiron One 2305/2310 Service Manual

file:///T|/htdocs/systems/InsOne2310/sr/sm/display.htm[7/25/2012 10:25:08 AM]

display bezel

screws (18)

tabs (3)

Replacing the Display Bezel

1. Follow the instructions in

Before You Begin

2. Replace the Bluetooth card (see ).

3. Replace the infrared card (see

Replacing the Infrared Card

4. Replace the camera module (see

Replacing the Camera Module

5. Slide the camera cable, infrared cable, and Bluetooth cable through the slots on the chassis.

6. Align the display bezel over the display and gently snap the display bezel into place.

7. Turn the computer over.

8. Ensure that the three tabs on the display bezel are secured to the slots on the chassis.

9. Route the camera cable, infrared cable, and Bluetooth cable through the routing guides.

10. Adhere the silver foil that secures the camera module to the chassis.

11. Replace the 18 screws that secure the display bezel to the chassis.

12. Replace the middle frame (See

Replacing the Middle Frame

13. Replace the system board (See

Replacing the System Board

14. Replace the AV board (See

Replacing the Audio Video (AV) Board

CAUTION:

Before turning on the computer, replace all screws and ensure that no stray screws remain

inside the computer. Failure to do so may result in damage to the computer.

15. Connect your computer and all attached devices to electrical outlets, and turn them on.

Содержание Inspiron One 2305

































































































Результаты поиска

Содержание Inspiron One 2305

Отзывы:

Похожие инструкции для Inspiron One 2305

Бренды по названию

Популярные бренды

Dell Inspiron One 2305, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron One 2305

Отзывы:

Похожие инструкции для Inspiron One 2305

Бренды по названию

Популярные бренды