Dell Inspiron One 2305 Скачать руководство пользователя страница 55

Страница: 55 / 96

MXM Assembly (Optional): Dell Inspiron One 2305/2310 Service Manual

file:///T|/htdocs/systems/InsOne2310/sr/sm/mxm_heat.htm[7/25/2012 10:24:57 AM]

Back to Contents Page

MXM Assembly (Optional)

Dell™ Inspiron™ One 2305/2310 Service Manual

Removing the MXM Assembly

Replacing the MXM Assembly

WARNING:

Before working inside your computer, read the safety information that shipped with your

computer. For additional safety best practices information, see the Regulatory Compliance Homepage at

www.dell.com/regulatory_compliance.

WARNING:

The MXM assembly may be very hot during normal operation. Ensure that it has had sufficient

time to cool before you touch it.

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to

servicing that is not authorized by Dell™ is not covered by your warranty.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by

periodically touching an unpainted metal surface (such as a connector on your computer).

Removing the MXM Assembly

1. Follow the instructions in

Before You Begin

2. Remove the back cover (see

Removing the Back Cover

3. Follow the instructions from

step 2

step 5

Removing the Front Stand

4. Remove the system-board shield (see

Removing the System-Board Shield

5. Remove the MXM-assembly fan (see

Removing the MXM-Assembly Fan

6. Remove the three screws that secure the MXM-assembly to the chassis.

7. Remove the MXM assembly from the MXM-assembly connector.

NOTE:

The appearance of the system board may vary based on your computer model.

MXM assembly connector

MXM assembly

Содержание Inspiron One 2305

































































































Результаты поиска

Содержание Inspiron One 2305

Отзывы:

Похожие инструкции для Inspiron One 2305

Бренды по названию

Популярные бренды

Dell Inspiron One 2305, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron One 2305

Отзывы:

Похожие инструкции для Inspiron One 2305

Бренды по названию

Популярные бренды