Dell Inspiron 4150 Скачать руководство пользователя страница 113

Страница: 113 / 163

Memory Modules, Mini PCI Card, and Modem: Dell Inspiron 4150

5 inner tabs (2 per

connector)

3. Lift the memory module out of its connector.

Replacing Memory Modules

1. If you only have one memory module, install it in the connector labeled "JDIM1"

on the system board. Install a second memory module in the connector labeled

"JDIM2."

HINT:

Memory modules are keyed, or designed to fit into their connectors, in

only one direction.

NOTICE:

The memory module must be inserted at a 45-degree angle to avoid

damaging the connector.

2. Align the notch in the memory module edge connector with the keying tab in the

connector on the system board.

3. Slide the edge connector of the module firmly into the connector at a 45-degree

angle, and rotate the module down until you hear a click. If you do not hear the

click, remove the module and reinstall it.

4. Replace the cover and tighten the two captive screws.

Mini PCI Card

You must remove the Mini PCI card before the system board can be removed.

Removing the Mini PCI Card

NOTICE:

Disconnect the computer and any attached devices from electrical

outlets, and remove any installed batteries.

file:///F|/Service%20Manuals/Dell/Inspiron/4150/upgrades.htm (4 of 8) [2/28/2004 7:29:41 AM]

Содержание Inspiron 4150




































































































































































Результаты поиска

Содержание Inspiron 4150

Отзывы:

Похожие инструкции для Inspiron 4150

Бренды по названию

Популярные бренды

Dell Inspiron 4150, Руководство пользователя

Результаты поиска

Содержание Inspiron 4150

Отзывы:

Похожие инструкции для Inspiron 4150

Бренды по названию

Популярные бренды