Diskette Drive A
(the boot floppy drive) is the 3.5-inch floppy drive installed in the top externally accessible
drive bay. The two options are
3.5 Inch, 1.44 MB,
and
Not Installed.
Tape drives are not reflected in the
Diskette Drive A
option. For example, if a single floppy drive and a tape
drive are attached to the floppy drive interface cable, set
Diskette Drive A
to
3.5 Inch, 1.44 MB
.
Fastboot
On
(default) — Your computer boots in 10 seconds or less, skipping certain configurations and tests
Off
— Your computer does not skip certain configurations and tests during the boot
process
HDD Priority
HDD
(default)
USB Device
NOTE:
To boot from a USB memory device, select the USB device and move it to make it the first device.
Integrated Devices—
Configures the following devices integrated with the system board:
Sound —
Settings are
On (
default
)
or
Off.
USB Controller —
Settings are
On
or
Off.
Network Interface Controller
— Settings are
On
(default),
Off
, or
On
w/ PXE
. Settings for
On w/
PXE
are
PXE
,
RPL
,
BootP
, or
NetWare
as the active boot mode.
Mouse Port
— Settings are
On
or
Off.
Serial Port 1 and Serial Port 2 —
Settings are
Off
and
Auto
(default).
Auto
automatically configures a connector to a particular designation (
COM1
or
COM3
for
Serial Port
1
;
COM2
or
COM4
for
Serial Port 2
).
If you set a serial connector to
Auto
and add a card containing a connector configured to the same
designation, the computer automatically remaps the integrated port to the next available connector
designation that shares the same IRQ setting as follows:
COM1
(I/O address 3F8h), which shares IRQ4 with
COM3
, is remapped to
COM3
(I/O address 3E8h).
COM2
(I/O address 2F8h), which shares IRQ3 with
COM4
, is remapped to
COM4
(I/O address 2E8h).
NOTE:
When two COM connectors share an IRQ setting, you can use either connector as necessary, but you
may not be able to use them both at the same time. If you are running the Windows 95 or IBM® OS/2®
operating system, you cannot use both serial connectors at the same time. If the second connector (COM3 or
COM4) is also in use, the integrated connector is turned off.
Parallel Port —
Settings are
Mode
,
I/O Address
, and
DMA Channel
Mode
settings are
PS/2
,
EPP
,
ECP
,
AT
, or
Off
. Set the
Mode
option according to the type of device
connected to the parallel connector. To determine the correct mode to use, see the documentation that
came with the device.
I/O Address
settings are
378h
(default),
278h
, or
3BCh.
The settings are not available when
Mode
is
set to
Off.
NOTE:
You cannot set the parallel connector to
3BCh
if
Mode
is set to
EPP
.
DMA Channel
appears only when
Mode
is set to
ECP.
Settings are
DMA 1
,
DMA 3
, or
Off
.
IDE Drive Interface —
Settings are
Off
and
Auto
(default)
Auto
turns off the IDE interface when necessary to accommodate a controller card installed in an
expansion slot.
Diskette Interface
— Settings are
Auto
(default),
Read Only
, and
Off
Auto
turns off the integrated floppy drive controller when necessary to accommodate a controller card
installed in an expansion slot.
Read Only
prevents the computer's integrated floppy drive controller from writing to floppy drives and
activates
Auto.
USB Emulation —
Settings are
On
and
Off
(default for Windows NT®)
Primary Video Controller
— When video is integrated on the system board, the options are
Auto
(default) and
Onboard
.
Содержание GX260 - Optiplex Pentium 4 2.0GHz 512MB 40GB CD
