Figure 86. Removing the 2 x 2.5-inch rear drive module
Next steps
1.
Replace the 2 x 2.5-inch rear drive module
Installing the 2 x 2.5-inch rear drive module
Prerequisites
1. Follow the safety guidelines listed in
.
2. Follow the procedure listed in
Before working inside your system
.
4.
.
5. Disconnect the cables from the rear drive module.
NOTE:
Refer
topic for more information.
Steps
1. Align the slot on the rear drive module with the guide on the system.
2. Place the rear drive module on top of the riser until firmly seated.
3. Using a Phillips #2 screwdriver, tighten the captive screws that secures the rear drive module to the system.
Installing and removing system components
87
