Figure 170. Removing the Serial COM port
5. Install the filler bracket if not replacing the serial COM port.
Next steps
1.
.
Installing the serial COM port
The procedure to install serial COM port from Riser 3 or 4 is same.
Prerequisites
1. Follow the safety guidelines listed in the
.
2. Follow the procedure listed in
Before working inside your system
3.
.
NOTE:
The serial COM port is supported only in slot 4 or slot 8 of the expansion card riser.
Steps
1. Open the latch on the expansion card riser and remove the filler bracket from the expansion card riser.
2. Slide the serial COM port into the expansion card riser and close the latch.
Installing and removing system components
171
