Dell E5400 - Latitude - Core 2 Duo 2.4 GHz Скачать руководство пользователя страница 23

Страница: 23 / 73

Align the display hinges with the holes in the base of the computer, then lower the display into place.

Replace the two pairs of M2.5 x 8-mm hinge screws on the bottom and top of the computer.

Route the display cable and antenna cables beneath the plastic tabs on the palm rest.

Slide the antenna cables through the hole in the palm rest and the base of the computer.

Connect the display cable to the display cable connector on the system board.

Replace the keyboard (see

Replacing the Keyboard

Replace the hinge cover (see

Replacing the Hinge Cover

Close the display and turn the computer over.

Replace the bottom of the base assembly (see

Replacing the E5500 Bottom of the Base Assembly

10.

Follow the procedures in

After Working on Your Computer

E5500 Display Bezel

Removing the E5500 Display Bezel

Follow the instructions in

Before Working on Your Computer

Remove the hinge cover (see

Removing the Hinge Cover

Remove the keyboard (see

Removing the Keyboard

Remove the display assembly (see

Removing the E5500 Display Assembly

Starting at the middle bottom of the display panel, use your fingers to separate the bezel from the top cover, then lift the inside edges to separate the
remainder of the bezel.

CAUTION:

Before you begin the following procedure, follow the safety instructions that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.

NOTE:

This procedure assumes that you have completed the removal procedure first.

NOTICE:

Ensure that the antenna cables are properly routed and secured beneath the plastic tabs on the palm rest.

1 antenna cables

CAUTION:

Before you begin the following procedure, follow the safety instructions that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.

Содержание E5400 - Latitude - Core 2 Duo 2.4 GHz










































































Результаты поиска

Содержание E5400 - Latitude - Core 2 Duo 2.4 GHz

Отзывы:

Похожие инструкции для E5400 - Latitude - Core 2 Duo 2.4 GHz

Бренды по названию

Популярные бренды

Dell E5400 - Latitude - Core 2 Duo 2.4 GHz, Руководство по обслуживанию

Результаты поиска

Содержание E5400 - Latitude - Core 2 Duo 2.4 GHz

Отзывы:

Похожие инструкции для E5400 - Latitude - Core 2 Duo 2.4 GHz

Бренды по названию

Популярные бренды