Dell DX6000 Скачать руководство пользователя страница 64

Страница: 64 / 198

Using the System Setup Program and UEFI Boot Manager

Integrated Devices Screen

USB Flash Drive

Emulation Type

(

Auto

default)

Determines the emulation type for a USB flash drive.

Hard disk

allows the USB flash drive to act as a hard

drive.

Floppy

allows the USB flash drive to act as a

removable diskette drive.

Auto

automatically chooses an

emulation type.

Auto

automatically chooses the appropriate emulation

type for the device, except for devices installed in the

internal SD card slot. A device installed in the internal

SD card slot will automatically emulate a hard drive. If

you install a device in this slot that is configured as a

removable diskette drive, you must manually set the

emulation type to

Floppy

Boot Sequence Retry

(

Disabled

default)

If this field is enabled and the system has failed to boot,

the system will reattempt to boot after 30 seconds.

Option

Description

Integrated SAS/RAID

Controller

(

Enabled

default)

Enables or disables the integrated storage controller.

User Accessible USB Ports

(

All Ports On

default)

Enables or disables the user-accessible USB ports.

Options are

All Ports On

Only Back Ports On

and

All

Ports Off

Internal USB Port

(

default)

Enables or disables the internal USB port.

Internal SD Card Port

Enables or disables the internal SD card port.

Embedded NIC1 and

NIC2

Embedded NIC3 and

NIC4

Enables or disables the OS interface of the four

embedded NICs. (The NICs may also be accessed

through the system’s management controller.)

Embedded Gb NIC

(NIC1 default:

Enabled

with PXE

;

Other NICs:

Enabled

)

Enables or disables the embedded NICs. Options are

Enabled

Enabled with PXE

Enabled with iSCSI Boot

and

Disabled

. PXE support allows the system to boot

from the network.

MAC Address

Displays the MAC address for the NIC.

Option

Description

Содержание DX6000







































































































































































































Результаты поиска

Содержание DX6000

Отзывы:

Бренды по названию

Популярные бренды

Dell DX6000, Руководство владельца оборудования

Результаты поиска

Содержание DX6000

Отзывы:

Бренды по названию

Популярные бренды