manualshive.com logo in svg

Dell DX6000, Руководство владельца оборудования

Поделиться
Скачать
Dell DX6000 Скачать руководство пользователя страница 120

120

Installing System Components

Expansion Cards and Expansion-Card Risers 

The system supports up to four PCI Express (PCIe) expansion cards on two 

expansion-card risers. 

• Expansion-card riser 1 provides two PCIe x4-link Gen 2 expansion slots.
• Expansion-card riser 2 is offered in two versions:

–

The standard expansion-card riser 2 provides two PCIe x8-link Gen 2 

expansion slots.

–

The optional expansion-card riser 2 provides one PCIe x16-link Gen 2 

expansion slot.

 

CAUTION: 

Expansion cards can only be plugged into the slots on the expansion-

card risers. Do not plug any expansion cards into the riser connectors on the 
system board.

To identify expansion slots, see "Expansion-Card Riser-Board Components 

and PCIe Buses" on page 184.

Expansion Card Installation Guidelines

Observe the following notes and guidelines regarding the expansion-card 

slots:

• PCI Express Generation 2 and Generation 1 expansion cards are supported 

in all slots. 

• In slots 2, 3, and 4, expansion cards can have a maximum length of 24.13 

cm (9.5"). Slot 1 supports a full-length (30.99-cm [12.2"]) expansion 

card. 

• The system supports three full-height expansion cards and one low-profile 

expansion card (slot 2).

• Although slots 1 and 2 are physically PCIe x8 connectors, they function 

only as PCIe x4-link slots.

• When the optional x16-link riser is installed, slot 4 is not available.
• The expansion-card slots are not hot-swappable.
• Besides the integrated storage controller, the system supports a maximum 

of two PERC controller expansion cards to manage external storage.

Содержание DX6000







































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды