Dell D28M, Руководство по обслуживанию

Страница: 36 / 94

Steps
1. Locate the notch on the 2230 solid-state drive/Intel Optane memory.
2. Align the notch on the 2230 solid-state drive/Intel Optane memory with the tab on the M.2 card slot.
3. Slide the 2230 solid-state drive/Intel Optane memory into the M.2 card slot on the system board.
4. Replace the screw (M2x3) that secures the 2230 solid-state drive/Intel Optane memory to the system board.
Next steps
1. Install the left-side cover .
2. Follow the procedure in After working inside your computer .
NOTE: Enable the Intel Optane memory after you replace the Intel Optane memory module. For more information about
enabling the Intel Optane memory, see Enabling Intel Optane memory .
Graphics card
Removing the graphics card
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the left-side cover .
About this task
The following images indicate the location of the graphics card and provides a visual representation of the removal procedure.
36 Disassembly and reassembly