Dell D28M Скачать руководство пользователя страница 70

Страница: 70 / 94

Option

Description

•

SATA-4

•

M.2 PCIe SSD-0

•

M.2 PCIe SSD-1

Smart Reporting

This field controls whether hard drive errors for integrated drives are reported during system
startup. The

Enable Smart Reporting

option is disabled by default.

USB Configuration

Allows you to enable or disable the integrated USB controller.

The options are:

•

Enable USB Boot Support—enabled by default

•

Enable Front USB Ports—enabled by default

•

Enable Rear USB Ports—enabled by default

Front USB Configuration

Allows you to enable or disable the front USB ports.

The options are:

•

Front Port 1(Bottom Right)*—enabled by default

•

Front Port1 w/PowerShare (Top Right)—enabled by default

•

Front Port 2(Bottom Left)*—enabled by default

•

Front Port 2(Top Left)—enabled by default

Rear USB Configuration

Allows you to enable or disable the rear USB ports. All the ports are enabled by default.

USB PowerShare

This option enables you to charge the external devices, such as mobile phones, music player. The

Enable USB PowerShare

option is disabled by default.

Audio

Allows you to enable or disable the integrated audio controller. The option

Enable Audio

is enabled

by default.

•

Enable Microphone—enabled by default

•

Enable Internal Speaker—enabled by default

Dust Filter Maintenance

Allows you to enable or disable BIOS messages for maintaining the optional dust filter that is installed
on your computer. BIOS generates a preboot reminder to clean or replace the dust filter based on
the interval set.

•

Disabled—enabled by default

•

15 days

•

30 days

•

60 days

•

90 days

•

120 days

•

150 days

•

180 days

Miscellaneous Devices

Allows you to enable or disable various on board devices. The options are:

•

Enable PCI Slot—enabled by default

•

Enable Secure Digital (SD) Card—enabled by default

•

Secure Digital (SD) Card

•

Secure Digital (SD) Card Read-Only Mode

Video screen options

Table 5. Video

Option

Description

Primary Display

Allows you to select the primary display when multiple controllers are available in the system.

•

Auto

(default)

System setup

Содержание D28M































































































Результаты поиска

Содержание D28M

Отзывы:

Dell D28M, Руководство по обслуживанию, Страница: 70 / 94

Результаты поиска

Содержание D28M

Отзывы: