Dell D28M Скачать руководство пользователя | Manualshive

Страница: 71 / 94

background image

Option

Description

•

Intel HD Graphics

NOTE:

If you do not select Auto, the on-board graphics device will be present and

enabled.

Security

Table 6. Security

Option

Description

Admin Password

Allows you to set, change, and delete the admin password.

System Password

Allows you to set, change, and delete the system password.

Internal HDD-0 Password

Allows you to set, change, and delete the computer internal hard drive.

Strong Password

This option lets you enable or disable strong password for the system. The option is disabled by
default.

Password Configuration

Allows you to control the minimum and maximum number of characters that are enabled for an
administrative password and the system password. The range of characters is 4–32.

Password Bypass

This option enables you to bypass the System (Boot) password and the internal hard drive password
prompts during a system restart.

•

Disabled

—Always prompt for the system and internal hard drive password when they are set.

This option is enabled by default.

•

Reboot Bypass—Bypass the password prompts on restarts (warm boots).

NOTE:

The system always prompts for the system and internal hard drive passwords

when powered on from the off state (a cold boot). Also, the system prompts for
passwords on any module bay HDDs that may be present.

Password Change

This option lets you determine whether changes to the System and Hard Disk passwords are
permitted when an administrator password is set.

Allow Non-Admin Password Changes

- This option is enabled by default.

UEFI Capsule Firmware Updates

This option controls whether this system enables BIOS updates through UEFI capsule update
packages. This option is enabled by default. Disabling this option blocks BIOS updates from services
such as Microsoft Windows Update and Linux Vendor Firmware Service (LVFS)

TPM 2.0 Security

Allows you to control whether the Trusted Platform Module (TPM) is visible to the operating
system.

•

TPM On—enabled by default

•

Clear

•

PPI Bypass for Enable Commands

•

PPI Bypass for Disable Commands

•

PPI Bypass for Clear Commands

•

Attestation Enable—enabled by default

•

Key Storage Enable—enabled by default

•

SHA-256—enabled by default

The options are:

•

Disabled

•

Enabled—enabled by default

Absolute

This field enables you to enable, disable, or permanently disable the BIOS module interface of the
optional Absolute Persistence Module service from Absolute Software.

•

Enabled—enabled by default

•

Disabled

System setup

71

«
...
69
70
71
72
73
...
»

Содержание D28M































































































Отзывы:

Нет отзывов

Похожие инструкции для D28M

Бренд: IBM Страницы: 155

ACE-6000 Series

Бренд: Acewell Страницы: 2

POWERMATE - VERSION 2008

Бренд: NEC Страницы: 32

Бренд: IBM Страницы: 75

Literail Workstation 6 Person

Бренд: Jason.L Страницы: 4

Digital Signage LCD integrated w/ PC...

Бренд: I-Tech Страницы: 1

ProArt PA Series

Бренд: Asus Страницы: 40

Бренд: Asus Страницы: 46

Бренд: Asus Страницы: 80

Бренд: Asus Страницы: 76

Бренд: Asus Страницы: 75

Бренд: Asus Страницы: 44

Бренд: Asus Страницы: 90

Бренд: Asus Страницы: 56

P5G43 V4-Series

Бренд: Asus Страницы: 110

Бренд: Asus Страницы: 44

Бренд: Asus Страницы: 56

Бренд: Asus Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды