Dell D28M Скачать руководство пользователя | Manualshive

Страница: 86 / 94

background image

Troubleshooting

Enhanced Pre-Boot System Assessment (ePSA)
diagnostics

About this task

The ePSA diagnostics (also known as system diagnostics) performs a complete check of your hardware. The ePSA is embedded with the
BIOS and is launched by the BIOS internally. The embedded system diagnostics provides a set of options for particular devices or device
groups allowing you to:

•

Run tests automatically or in an interactive mode

•

Repeat tests

•

Display or save test results

•

Run thorough tests to introduce additional test options to provide extra information about the failed device(s)

•

View status messages that inform you if tests are completed successfully

•

View error messages that inform you of problems encountered during testing

NOTE:

Some tests for specific devices require user interaction. Always ensure that you are present at the computer

terminal when the diagnostic tests are performed.

For more information, see

Dell EPSA Diagnostic 3.0

.

Running the ePSA diagnostics

Steps

1. Turn on your computer.
2. As the computer boots, press the F12 key as the Dell logo appears.
3. On the boot menu screen, select the

Diagnostics

option.

4. Click the arrow at the bottom left corner.

Diagnostics front page is displayed.

5. Click the arrow in the lower-right corner to go to the page listing.

The items detected are listed.

6. To run a diagnostic test on a specific device, press Esc and click

Yes

to stop the diagnostic test.

7. Select the device from the left pane and click

Run Tests

.

8. If there are any issues, error codes are displayed.

Note the error code and validation number and contact Dell.

Diagnostics

The computer POST (Power On Self Test) ensures that it meets the basic computer requirements and the hardware is working
appropriately before the boot process begins. If the computer passes the POST, the computer continues to start in a normal mode.
However, if the computer fails the POST, the computer emits a series of LED codes during the start-up. The system LED is integrated on
the Power button.

The following table shows different light patterns and what they indicate.

4

86

Troubleshooting

«
...
84
85
86
87
88
...
»

Содержание D28M































































































Отзывы:

Нет отзывов

Похожие инструкции для D28M

Бренд: IBM Страницы: 717

Бренд: NEC Страницы: 28

Бренд: IBM Страницы: 462

Бренд: Ace Страницы: 17

IntelliStation E Pro Type 6226

Бренд: IBM Страницы: 138

6868 - IntelliStation M - Pro

Бренд: IBM Страницы: 188

Presario SR5700 - Desktop PC

Бренд: Compaq Страницы: 76

Бренд: IBM Страницы: 40

Бренд: Lenovo Страницы: 31

Бренд: Lenovo Страницы: 4

Бренд: Lenovo Страницы: 31

Бренд: Lenovo Страницы: 35

Бренд: Lenovo Страницы: 37

Бренд: Lenovo Страницы: 53

Бренд: Lenovo Страницы: 62

Бренд: Lenovo Страницы: 62

Бренд: Lenovo Страницы: 94

Бренд: Lenovo Страницы: 94

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды