Dell D03T, Руководство по обслуживанию

Страница: 91 / 119

Steps
1. Slide the power-supply unit into the chassis until the securing tab snaps into position.
2. Replace the four (#6x32) screws to secure the power-supply unit to the chassis.
3. Route the PCIe power-cables and SATA power-cables through the bottom-air shroud.
4. Close the bottom-air shroud cover.
5. Connect the PCIe power-cables to the slots on the PCIe holder.
6. Connect the SATA power-cables to the connectors on the system board.
7. Align and place the power-supply cover over the power-supply unit.
8. Install the two (#6-32) screws to secure the power-supply cover to the chassis.
9. Open the clips on the routing guides on the power-supply cover and route the CPU ATX power-cables through the clips.
10. Close the clips on the routing guides on the power-supply cover.
11. Connect the ATX CPU power-cables to the connectors on the system board..
Next steps
1. Install the air shroud .
2. Install the side cover .
3. Follow the procedure in After working inside your computer .
System board
System-board callouts
This topics provides detailed callouts for the connectors on the system board:
System-board callouts
Removing and installing components 91