Dell D03T Скачать руководство пользователя страница 107 | Manualshive

Страница: 107 / 119

background image

Table 12. System setup options—Passwords menu (continued)

Passwords

Password Bypass

When enabled, this always prompts for system and internal hard drive
passwords when powered on from the off state.

By default, the

Disabled

option is selected.

Password Changes

Enable Non-Admin Password Changes

Enable or disable to change system and hard drive password without the need
for admin password.

By default, the option is enabled.

Admin Setup Lockout

Enable Admin Setup Lockout

Enables administrators control over how their users can or cannot access BIOS
setup.

By default, the option is disabled.

Master Password Lockout

Enable Master Password Lockout

When enabled, this disables the master password support.

By default, the option is disabled.

Allow Non-Admin PSID Revert

Enable Allow Non-Admin PSID Revert

Controls access to the Physical Security ID (PSID) revert of NVMe hard-drives
from the Dell Security Manager prompt.

By default, the option is disabled.

Table 13. System setup options—Update, Recovery menu

Update, Recovery

UEFI Capsule Firmware Updates

Enable or disable BIOS updates through UEFI capsule update packages.

NOTE:

Disabling this option will block BIOS updates from services such as

Microsoft Windows Update and Linux Vendor Firmware Service (LVFS).

By default, the option is enabled.

BIOS Recovery from Hard Drive

Enables the user to recover from certain corrupted BIOS conditions from a
recovery file on the user primary hard drive or an external USB key.

By default, the option is enabled.

NOTE:

BIOS Recovery from Hard Drive is not available for self-encrypting

drives (SED).

BIOS Downgrade

Allow BIOS Downgrade

This field controls the flashing of the system firmware to previous revisions.

By default, the option is enabled.

SupportAssist OS Recovery

Enable or disable the boot flow for SupportAssist OS Recovery tool in the
event of certain system errors.

By default, the option is enabled.

BIOSConnect

Enable or disable cloud Service operating system recovery if the main operating
system fails to boot with the number of failures equal to or greater than the
value specified by the Auto operating system Recovery Threshold setup option
and local Service operating system does not boot or is not installed.

By default, the option is enabled.

Dell Auto operating system Recovery
Threshold

Controls the automatic boot flow for SupportAssist System Resolution Console
and for Dell operating system Recovery Tool.

BIOS setup

107

«
...
105
106
107
108
109
...
»

Содержание D03T
























































































































Отзывы:

Нет отзывов

Похожие инструкции для D03T

Бренд: Zenith Страницы: 98

POWERMATE P - SERVICE 1996

Бренд: NEC Страницы: 178

DeviceEdge Mini AIE-C011

Бренд: Aetina Страницы: 14

Eee Top ET16 Series

Бренд: Asus Страницы: 34

Бренд: Asus Страницы: 3

Бренд: Asus Страницы: 46

Бренд: Asus Страницы: 60

Бренд: Asus Страницы: 86

Бренд: Asus Страницы: 50

Бренд: Asus Страницы: 40

Бренд: Asus Страницы: 38

Бренд: Asus Страницы: 46

Бренд: Asus Страницы: 95

Бренд: Asus Страницы: 50

Бренд: Asus Страницы: 70

Бренд: Asus Страницы: 38

DiGiMatrix AB-V100

Бренд: Asus Страницы: 112

Бренд: Asus Страницы: 62

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды