Dell Colour Laser Printer 3110cn, Руководство пользователя

Страница: 40 / 131

40
Setting up Network Printing
Select Computer to Computer (ad hoc) networks only and close the Advanced dialog
box.
When wireless infrastructure mode is set to the printer:
Select Access point (Infrastructure) networks only and close the Advanced dialog box.
f.
Select the setting that you send to the printer in the list in Preferred Network group.
g.
Click
Move up
to move the setting to the top of the list.
h.
Click OK to close the Property dialog box.
NOTE:
When your operating system is earlier than Windows 2000, create settings according to the
manual of the wireless setting tool provided by your wireless device manufacturer.
For Fixed IP network:
1.
Create wireless setting of your computer following the steps below.
a.
Select
Network Connections
from Control Panel.
b.
Right-click Wireless Network Connection and select Properties .
c.
Select the Wireless Networks tab.
d.
Make sure the check box for Use Windows to configure my wireless network settings is
checked.
NOTE:
Be sure to write down the current wireless computer settings in steps d and f so that you
can restore them later.)
e.
Click the Advanced button.
f.
Select Computer to Computer (ad hoc) networks only and close the Advanced dialog
box.
g.
Click the Add button to display Wireless network properties .
h.
Under the Association tab, enter the following information and click OK .
Network name (SSID): dell_device
Network Authentication: Open
Data encryption: Disabled
Ad hoc network: checked
i.
Click the Move up button to move the newly added SSID to the top of the list.
j.
Click OK to close the Property dialog box.
NOTE:
When your operating system is earlier than Windows 2000, create settings according to the
manual of the wireless setting tool provided by your wireless device manufacturer.
2.
Check the IP address on your computer.
e.g.: 1.2.3.4