Dell Colour Laser Printer 3110cn, Руководство пользователя

Страница: 14 / 131

14
Print Media Guidelines
Selecting Preprinted Forms and Letterhead
When selecting preprinted forms and letterhead paper for the printer:
• Use grain long papers for best results.
• Use only forms and letterhead printed using an offset lithographic or engraved printing
process.
• Select papers that absorb ink, but do not bleed.
• Avoid papers with rough or heavily textured surfaces.
• Use papers printed with heat-resistant inks designed for use in xerographic copiers. The ink
must withstand temperatures of 225°C (437°F) without melting or releasing hazardous
emissions.
• Use inks that are not affected by the resin in toner or the silicone in the fuser. Inks that are
oxidation-set or oil-based should meet these requirements; latex inks might not. If you are in
doubt, contact your paper supplier.
Printing on Letterhead
Check with the manufacturer or vendor to determine whether the preprinted letterhead you have
selected is acceptable for laser printers.
Page orientation is important when printing on letterhead. Use the following table for help when
loading letterhead in the print media sources.
Print media source Print side Page orientation
Standard 250-sheet tray
Optional 550-sheet feeder Face up Letterhead enters
the printer last