manualshive.com logo in svg

Dell Broadcom NetXtreme Family of Adapters, Руководство пользователя

Семейство адаптеров Dell Broadcom NetXtreme обеспечивает быструю и надежную сетевую связь. Установочное руководство доступно для скачивания бесплатно на manualshive.com. Следуйте инструкциям из Руководства для успешной установки и настройки вашего адаптера. Легко загрузить руководство на русском языке для вашего удобства.

Поделиться
Скачать
background image

ODI Driver Software: Broadcom NetXtreme II Network Adapter User Guide

file:///T|/htdocs/NETWORK/BroadCom/71921/NetXtremeII/en/dosodi.htm[9/26/2012 3:28:43 PM]

14.  Press 

ENTER

.

15.  Select 

Receive Buffers

, type 

32

 for the value, and then press 

F10

 to save and continue.

 NOTE: Do not change the default settings for any of the other items in the Installation Configuration Summary.

16.  Press 

F10

 to save and continue. The Bx2.LAN and Bx2.LDI files are copied to the directory.

17.  Restart the system to complete the install.
18.  As the files are being loaded, the system attempts to attach to a NetWare server using the frame types specified in

Net.cfg. If the connection is successful, a dialog box is displayed.

19.  Change to drive F and log on to the NetWare server.

 NOTE: The driver loads during system configuration, and the Broadcom banner, the adapter name, the MAC

address, the IRQ number, the detected line speed, and the bus number (BusNum) and device number (DevNum) of the

adapter are displayed. If the driver fails to load, an 

initialization fail

 message appears.

Configuring the Driver Software

The ODI driver software can be configured by adding specific optional keywords to the Net.cfg file.

If multiple (or multiport) Broadcom NetXtreme II adapters are installed in a system, the ODI driver software loads by default

on the adapter/port that has a good link. If two or more adapters have a good link, the ODI driver software loads on the

adapter having the latest Device ID. If two or more adapters that have a good link have the same Device ID, the ODI driver

software loads on the adapter that is located in the slot having the lowest bus number.

If it is necessary to have the ODI driver load on certain adapters in a certain order, the 

BusNum

, 

DevNum

, and 

FuncNum

keywords can be used. Do not use these keywords unless you know how to configure PCI devices.

The 

BusNum

 keyword value, which represents the PCI bus number in which the adapter is located, is a hexadecimal number

ranging from 0 to FF.

The 

FuncNum

 keyword value, which represents the function (port) number of a multiport adapter, is a hexadecimal number

with 0 representing the first port and 1 representing the second port.

The 

DevNum

 keyword value, which represents the assigned device number, is a hexadecimal number ranging from 0 to 1F.

 NOTES:

At the end of the ODI driver software installation process, note the BusNum and DevNum values that are

displayed. Alternatively, use Broadcom Advanced Control Suite (see 

Viewing Resource Information

) to view the

bus number, function (port) number, and device number assigned to each adapter (Windows users only).
The values for the 

BusNum

, 

DevNum

, and 

FuncNum

 keywords are displayed in hexadecimal notation when

the driver loads on the adapter.

Example 

BusNum

, 

DevNum

, and 

FuncNum

 keyword entries for loading the ODI driver on multiple adapters in

a certain order are shown below:

PROTOCOL <protocol name>
BIND BX2 
BIND BX2 
LINK DRIVER BX2 
BUSNUM 1
DEVNUM 9
FRAME  <frame #1 name>
LINK DRIVER BX2
BUSNUM 1
DEVNUM A
FRAME  <frame #2 name>

The 

LineSpeed

 keyword is used to force the speed of the network connection. The LineSpeed keyword requires a decimal

number and of either 10, 100, or 1000. Technically, a line speed of 1000 Mbit/s cannot be forced and can be achieved only

through auto-negotiation. For the sake of simplicity, the driver performs auto-negotiation when the line speed is set to a

value of 1000.

The 

Duplex

 keyword is used to force the duplex mode of the adapter. The Duplex keyword requires a text string of either

HALF or FULL. When the Duplex keyword is used, the LineSpeed keyword must also be used. If neither keyword is used, the

network adapter defaults to auto-negotiation mode.

Example keyword entries for the 

LineSpeed

, and 

Duplex

 keywords are shown below:

Содержание Broadcom NetXtreme Family of Adapters

































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Broadcom NetXtreme Family of Adapters

4IPNET WHG301 User Manual preview
WHG301
Бренд: 4IPNET Страницы: 97
DBM ACE9600 Operating Manual preview
ACE9600
Бренд: DBM Страницы: 50
Paradyne Hotwire 6341 Installation Instructions Manual preview
Hotwire 6341
Бренд: Paradyne Страницы: 23
Draytek Vigor 2760 Series Quick Start Manual preview
Vigor 2760 Series
Бренд: Draytek Страницы: 54
ZyXEL Communications XS1920 Series User Manual preview
XS1920 Series
Бренд: ZyXEL Communications Страницы: 422
Dahua NVRPRO User Manual preview
NVRPRO
Бренд: Dahua Страницы: 113
Paradyne FrameSaver DSL 9788 Router Installation Instructions Manual preview
FrameSaver DSL 9788 Router
Бренд: Paradyne Страницы: 28
G&D DVI-Vision-IP-Fiber Installation And Operation Manual preview
DVI-Vision-IP-Fiber
Бренд: G&D Страницы: 240
OneAccess One80XM Installation Manual preview
One80XM
Бренд: OneAccess Страницы: 47
SMC Networks SMC-EZ1026DT User Manual preview
SMC-EZ1026DT
Бренд: SMC Networks Страницы: 56
DELTA GROUP LOYTEC LIP‑3ECTC Installation Instructions preview
LOYTEC LIP‑3ECTC
Бренд: DELTA GROUP Страницы: 4
Avaya X330W-2USP Quick Start Manual preview
X330W-2USP
Бренд: Avaya Страницы: 16
One Identity Safeguard for Privileged Sessions 3000 Installation Manual preview
Safeguard for Privileged Sessions 3000
Бренд: One Identity Страницы: 37
Allynk Technology CAG-0100 User Manual preview
CAG-0100
Бренд: Allynk Technology Страницы: 39
Me VS-M1 Instructions Manual preview
VS-M1
Бренд: Me Страницы: 28
Commax CVN-0430F User Manual preview
CVN-0430F
Бренд: Commax Страницы: 122
Tektronix 7B87 Instruction Manual preview
7B87
Бренд: Tektronix Страницы: 143
ASTRO U 960 Operating Manual preview
U 960
Бренд: ASTRO Страницы: 12

Бренды по названию

Популярные бренды

Загрузить еще бренды