Replace unsupported imaging unit [32.xy]
Remove the imaging unit, and then install a supported one to clear the message and continue printing. For more
information, see the instruction sheet that came with the supply or see the “Replacing supplies” section of the
User’s
Guide
.
Note:
If you do not have a replacement imaging unit, then see the “Ordering supplies” section of the
User’s Guide
or
visit our Web site.
Replace wiper
Try one or more of the following:
•
Replace the fuser wiper in the printer.
•
Touch
Continue
to clear the message and continue printing.
Restore held jobs?
Try one or more of the following:
•
From the printer control panel, touch
Restore
to restore all held jobs stored in the printer hard disk.
•
From the printer control panel, touch
Do not restore
if you do not want to restore any of the print jobs.
Scan document too long
The scan job exceeds the maximum number of pages. Touch
Cancel job
to clear the message and cancel the scan job.
Scanner automatic feeder cover open
Close the ADF cover.
Scanner disabled by admin [840.01]
Print without the scanner, or contact your system support person.
Scanner disabled. Contact system administrator if problem persists. [840.02]
Try one or more of the following:
•
Touch
Continue with scanner disabled
to return to the home screen, and then contact your system support person.
•
Touch
Reboot and automatically enable scanner
to cancel the job.
Note:
This attempts to enable the scanner.
Scanner jam, remove all originals from the scanner [2yy.xx]
Remove the jammed paper from the scanner.
Troubleshooting
275
