Dell B5460dn Mono Laser Printer Скачать руководство пользователя страница 188

Страница: 188 / 233

Too many flash options installed [58]

Turn off the printer.

Unplug the power cord from the electrical outlet.

Remove the extra flash memory.

Connect the power cord to a properly grounded electrical outlet.

Turn the printer back on.

Too many trays attached [58]

Turn off the printer.

Unplug the power cord from the electrical outlet.

Remove the extra trays.

Connect the power cord to a properly grounded electrical outlet.

Turn the printer back on.

Tray [x] paper size unsupported

The paper size in the specified tray is unsupported. Replace it with a supported paper size.

Unformatted flash detected [53]

Try one or more of the following:

•

From the printer control panel, press

to stop the defragmentation and continue printing.

•

Format the flash memory device.

Note:

If the error message remains, then the flash memory device may be defective and need to be replaced.

Unsupported disk

An unsupported disk has been inserted. Remove the unsupported disk, and then install a supported one.

Unsupported option in slot [x] [55]

Turn off the printer.

Unplug the power cord from the electrical outlet.

Remove the unsupported option card from the printer controller board, and then replace it with a supported card.

Connect the power cord to a properly grounded electrical outlet.

Turn the printer back on.

Troubleshooting

188

Содержание B5460dn Mono Laser Printer










































































































































































































































Результаты поиска

Содержание B5460dn Mono Laser Printer

Отзывы:

Похожие инструкции для B5460dn Mono Laser Printer

Бренды по названию

Популярные бренды

Dell B5460dn Mono Laser Printer, Руководство пользователя

Результаты поиска

Содержание B5460dn Mono Laser Printer

Отзывы:

Похожие инструкции для B5460dn Mono Laser Printer

Бренды по названию

Популярные бренды