Dell B5460dn Mono Laser Printer Скачать руководство пользователя страница 157

Страница: 157 / 233

Lift the blue handle, and then pull the imaging unit out of the printer.

Place the imaging unit aside on a flat, smooth surface.

Warning—Potential Damage:

Do not expose the imaging unit to direct light for more than 10 minutes.

Extended exposure to light may cause print quality problems.

Pull the jammed paper gently to the right, and then remove it from the printer.

Note:

Make sure all paper fragments are removed.

Warning—Potential Damage:

The jammed paper may be covered with toner, which can stain garments and

skin.

Install the imaging unit.

Note:

Use the arrows on the side of the printer as a guide.

Insert the cartridge into the printer, and then push the blue handle back into place.

Clearing jams

157

Содержание B5460dn Mono Laser Printer










































































































































































































































Результаты поиска

Содержание B5460dn Mono Laser Printer

Отзывы:

Похожие инструкции для B5460dn Mono Laser Printer

Бренды по названию

Популярные бренды

Dell B5460dn Mono Laser Printer, Руководство пользователя

Результаты поиска

Содержание B5460dn Mono Laser Printer

Отзывы:

Похожие инструкции для B5460dn Mono Laser Printer

Бренды по названию

Популярные бренды