Dell 9200 Скачать руководство пользователя страница 130

Страница: 130 / 174

130

Appendix

Integrated Audio

Enables or disables the onboard audio controller.

USB Controller

Set to

(default) so that USB devices will be detected and supported in the

operating system.

USB for FlexBay

This field enables and disables the internal USB for FlexBay.

•

Off

— Internal USB for FlexBay is disabled.

•

— Internal USB for FlexBay is enabled.

•

No Boo

t — Internal USB for FlexBay is enabled but not bootable.

The factory default setting is

No Boot

NOTE:

This USB option appears only if a FlexBay device is installed.

Rear Quad USB

Enables or disables the 4-stack of USB ports on the back of the computer.

Real Dual USB

Enables or disables the 2-stack of USB ports on the back of the computer.

Front USB

Enables or disables the 2-stack of USB ports on the front of the computer.

PS/2 mouse port

If your computer has the optional PS/2 mouse port, then this option is listed.

Video

Primary Video

This setting specifies which video controller is primary when two video
controllers are present on the computer.

Performance

Multiple CPU Core

If your computer processor supports more than one core, this option appears
in the Options List.

Virtualization

If your computer processor supports virtual technology, this option appears in
the Options List.

SpeedStep

If your computer processor supports Intel

SpeedStep

technology, then this

option is listed and it allows you to enable or disable support for this feature.

HyperThreading

If your computer processor supports Hyper-Threading, this option appears in
the Options List.

HDD Acoustic Mode

•

Bypass (default)

— Your computer does not test or change the current

acoustics mode setting.

•

Quiet

— The hard drive operates at its most quiet setting.

•

Suggested

— The hard drive operates at the level suggested by the drive

manufacturer.

•

Performance

—

The hard drive operates at its maximum speed.

NOTE:

Switching to performance mode will cause the drive heads to move

faster, causing the hard drive to be noisier. However, some drives may not see an
increase in data transfer rates.

NOTE:

Changing the acoustics setting does not alter your hard drive image.

DIM_book.book Page 130 Monday, October 15, 2007 11:04 AM

Содержание 9200















































































































































































Результаты поиска

Содержание 9200

Отзывы:

Похожие инструкции для 9200

Бренды по названию

Популярные бренды

Dell 9200, Руководство пользователя

Результаты поиска

Содержание 9200

Отзывы:

Похожие инструкции для 9200

Бренды по названию

Популярные бренды