manualshive.com logo in svg

Dell 1350 Color, Руководство пользователя

Поделиться
Скачать
Dell 1350 Color Скачать руководство пользователя страница 195

Printing

191

• If the selection is a menu item, the default menu setting for the menu 

item appears.

Each menu item has a list of values for the menu item. A value can be:
• A phrase or word to describe a setting
• A numerical value that can be changed
• An On or Off setting
• Press the   or   button at the same time. This will restore the 

factory default menu settings. Press the   button to return the 

settings to the factory default menu settings.

4

Press the   or   button to scroll until the desired value appears.

5

Press the   button.
This enables the setting value, which is indicated by an asterisk (*) next to 

the setting value.

6

Press 

the 

 

(Cancel)

 or   button to return to the previous menu.

To continue setting other items, select the desired menu. To quit setting 

new values, press the 

 

(Cancel)

 button.

Driver settings may have precedence over changes previously made. In such 

case, change the defaults of the operator panel.

Using the Tool Box to Change the Printer Settings

You can select menu items and corresponding values from the Tool Box.

 

NOTE: 

 

NOTE: 

Factory defaults may vary for different countries. These settings are active 

until new ones are selected or the factory defaults are restored.

To select a new value as a setting:

1

Click 

Start

 

All Programs

 

Dell Printers

 

Dell 1350cnw Color 

Printer

 

Tool Box

.

 

NOTE: 

The Select Printer window appears in this step, when multiple printer 

drivers are installed on your computer. In this case, click the name of Dell 

1350cnw Color Printer listed in Printer Name, and then click OK.

The 

Tool Box

 opens.

Содержание 1350 Color









































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды