Dell 1350 Color Скачать руководство пользователя страница 142

Страница: 142 / 328

138

Dell Printer Configuration Web Tool

E-Mail Alert Setup Page

Purpose:

To verify the current settings of SMTP/POP (Simple Mail Transfer Protocol/

Post Office Protocol) used for the e-mail feature and E-Mail Alerts feature. In

this page, you can only verify the settings of items. If you want to change the

settings, go to the pages in the

Print Server Settings

tab.

Values:

HTTP

Port Status

Displays the port status.

Port Number

Displays the port number.

Simultaneous

Connections

Displays the number of connections received

simultaneously by the client.

Connection

Time-Out

Displays the connection time-out period.

Bonjour

(mDNS)

Port Status

Displays the port status.

Host Name

Displays the host name.

Printer Name

Displays the printer name.

SNMP

Port Status

Displays the port status.

LLTD

Port Status

Displays the port status.

IP Filter

(IPv4)

Address

Displays the list of IP addresses that are permitted

or denied access to the printer.

Address Mask

Displays the list of subnet mask that are

permitted or denied access to the printer.

Active Mode

Displays whether to be permitted or denied access

to the printer.

This item is displayed only when the printer is connected with a wired network.

This item is displayed only when the printer is connected with a wireless network.

This item is displayed when IPv4 or Dual Stack Mode is selected.

This item is displayed when IPv6 or Dual Stack Mode is selected.

This item is displayed only when Use Manual Address is Enable.

This item is displayed only when an IP address has been assigned.

This item is available only when using IPv6 dual mode.

This item is only available for LPD or Port9100.

Содержание 1350 Color









































































































































































































































































































































Результаты поиска

Содержание 1350 Color

Отзывы:

Бренды по названию

Популярные бренды

Dell 1350 Color, Руководство пользователя

Результаты поиска

Содержание 1350 Color

Отзывы:

Бренды по названию

Популярные бренды