manualshive.com logo in svg

Dell 1350 Color, Руководство пользователя

Поделиться
Скачать
Dell 1350 Color Скачать руководство пользователя страница 162

158

Print Media Guidelines

• Do not mix print media sizes, weights, or types in the same source. This 

may result in a paper jam. 

• Do not remove the PSI while a job is printing.
• Ensure that the paper is properly loaded in the MPF or PSI. 
• Flex paper back and forth, and then fan them. Straighten the edges of the 

stack on a level surface.

Selecting Preprinted Media and Letterhead

When selecting preprinted media and letterhead paper for the printer:

• Use grain long paper for best results.
• Use only forms and letterhead printed using an offset lithographic or 

engraved printing process.

• Select paper that absorb ink, but do not bleed.
• Avoid paper with rough or heavily textured surfaces.
• Use paper printed with heat-resistant inks designed for use in xerographic 

copiers. The ink must withstand temperatures of 225°C (437°F) without 

melting or releasing hazardous emissions.

• Use inks that are not affected by the resin in toner or the silicone in the 

fuser. Inks that are oxidation-set or oil-based should meet these 

requirements; latex inks might not. If you are in doubt, contact your paper 

supplier. 

Printing on Letterhead

Check with the manufacturer or vendor to determine whether the pre-printed 

letterhead you have selected is acceptable for laser printers. 

Содержание 1350 Color









































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды