CAUTION:
Do not lift the system board by holding a memory module, processor, or other components.
a
b
c
Integrated storage controller card
d
Internal USB key (if installed)
e
(if installed)
f
Processors and heat sink modules
CAUTION:
To prevent damage to the processor socket when replacing a faulty system board, ensure that
you cover the processor socket with the processor dust cover.
g
Memory modules and memory module blanks
h
Steps
1
Disconnect all cables from the system board.
CAUTION:
Take care not to damage the system identification button while removing the system board from the chassis.
2
Holding the post, lift the blue release pin, and slide the system board toward the front of the system to disengage the connectors from
the slots on the chassis.
3
Incline the system board at an angle, and lift the system board out of the chassis.
Figure 75. Removing the system board
Next step
Install the
.
Installing the system board
Prerequisite
Follow the safety guidelines listed in
Installing and removing system components
113
