manualshive.com logo in svg

Dell EMC Storage NX3340, Инструкция по установке и обслуживанию

Поделиться
Скачать
Dell EMC Storage NX3340 Скачать руководство пользователя страница 26

System Setup details

The 

System Setup Main Menu

 screen provides the following options.

NOTE: 

The NX Series systems support only BIOS mode. Do not change the boot mode to UEFI because the system will not load 

the appliance OS when in UEFI mode.

Option

Description

System BIOS

Enables you to configure BIOS settings.

iDRAC Settings

Enables you to configure the iDRAC settings.
The iDRAC settings utility is used to set up and configure the iDRAC parameters. You can enable or disable various 
iDRAC parameters using the iDRAC settings utility. For more information about this utility, see 

Integrated Dell 

Remote Access Controller User’s Guide

 at 

Dell.com/idracmanuals

.

Device Settings

Enables you to configure device settings.

System BIOS

You can use the 

System BIOS

 screen to edit specific functions such as boot order, system password, setup password, set the SATA RAID 

mode, and enable or disable USB ports.

Viewing System BIOS

To view the 

System BIOS

 screen, perform the following steps:

1 

Turn on, or restart your system.

2 

Press F2 immediately after you see the following message:

F2 = System Setup

NOTE: 

If your operating system begins to load before you press F2, wait for the system to finish booting, and then 

restart your system and try again.

3 

On the 

System Setup Main Menu

 screen, click 

System BIOS

.

System BIOS Settings details

The 

System BIOS Settings

 screen provides the following options.

NOTE: 

The NX Series systems support only BIOS mode. Do not change the boot mode to UEFI because the system will not load 

the appliance OS when in UEFI mode.

Option

Description

System Information

Specifies information about the system such as the system model name, BIOS version, and Service Tag.

Memory Settings

Specifies information and options related to the installed memory.

Processor Settings

Specifies information and options related to the processor such as speed and cache size.

SATA Settings

Specifies options to enable or disable the integrated SATA controller and ports.

Boot Settings

Specifies options to choose the Boot mode and allows you to modify the boot settings.

26

Pre-operating system management applications

Содержание Storage NX3340






























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды