•
Internal storage controller cards: PowerEdge RAID Controller (PERC) H730P Mini.
•
External storage controller cards: PERC H840 and 12 GB SAS HBA.
•
External storage:
– Two external enclosures for clustering: 12 Gbp/s MD JBOD - MD1400, MD1420, and SC Series.
– External Tape: LTO external drive, PV114x, TL1000, TL2000, TL4000, ML6000
Hard drive specifications
The NX3340 system supports up to eight 2.5" SAS, SATA hard drives and an optional optical drive.
The system ships from the factory with either two or four OS drives. Additional data drives must be ordered separately from the factory.
Ports and connectors specifications
The NX3340 system supports USB ports, NIC ports, VGA ports, and a serial connector.
USB ports
The NX3340 supports both USB 2.0 and USB 3.0-compliant ports.
Location
Type
Quantity
Front panel
USB 2.0-compliant port
One
Front panel
Micro USB 2.0-compliant port for iDRAC Direct
One
Back panel
USB 3.0-compliant port
Two
Internal
USB 3.0-compliant port
One
NOTE:
The micro USB 2.0-compliant port on the front panel can only be used as an iDRAC Direct or a management port.
NIC ports
The NX3340 system supports up to four Network Interface Controller (NIC) ports that are integrated on the network daughter card
(NDC). The ports are available in the following configurations.
•
Four RJ-45 ports that support 10, 100 and 1000 Mbps
•
Four RJ-45 ports that support 100 M, 1 G and 10 Gbps
•
Four RJ-45 ports, where two ports support maximum of 10 G and the other two ports maximum of 1 G
•
Two RJ-45 ports that support up to 1 Gbps and 2 SFP+ ports that support up to 10 Gbps
•
Four SFP+ ports that support up to 10 Gbps
•
Two SFP28 ports that support up to 25 Gbps
NOTE:
You can install up to three PCIe add-on NIC cards.
Serial connector
The NX3340 system supports one serial connector on the back panel. This port is a 9-pin connector, Data Terminal Equipment (DTE),
16550-compliant.
18
Technical specifications
