Dell EMC ECS EX300, Руководство по установке

Страница: 5 / 56

PDU component location.............................................................................................17
Installing the EMC PDU rails....................................................................................... 18
Installing the EMC PDU support assembly onto the rails............................................. 19
Completing EMC PDU support assembly installation...................................................19
Installing the front PDU tray.......................................................................................20
Installing the rear end of the rail..................................................................................21
Installing the front end of the rail................................................................................ 21
Installing screws......................................................................................................... 22
Inserting the EMC PDU onto the EMC PDU support assembly .................................. 27
Extend rails from the cabinet......................................................................................32
Install the system in the rails.......................................................................................33
Slide the system into the cabinet................................................................................34
Installing bezel pods (non-LED)..................................................................................35
Installing bezel pods (LEDs)....................................................................................... 35
EX300 node power button and LED light.....................................................................41
Best Practice: Using the portable lift adjacent to the long side of the enclosure........ 47
Reconfiguring the portable lift with the Voyager conversion kit ................................ 48
Adjusting the lift arm bar to just under 17 inches ....................................................... 49
Adjusting the arm for a low rail position......................................................................50
Locking the Casters....................................................................................................50
Removing an enclosure from rails 49" or less above the floor .....................................51
Tightening the Straps................................................................................................. 51
Unlocking the Casters................................................................................................ 52
Removing the Straps.................................................................................................. 52
Adjusting the arm for a high rail position.....................................................................53
Locking the Casters....................................................................................................54
Removing an enclosure from rails more than 49" above the floor .............................. 54
Tightening the Straps.................................................................................................55
Unlocking the Casters................................................................................................ 55
Support Table.............................................................................................................56
Removing the Straps.................................................................................................. 56 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
FIGURES
EX300 Third-Party Rack Installation Guide 5