Dell EMC ECS EX300 Скачать руководство пользователя страница 40

Страница: 40 / 56

--------------------- ------------ ------------------------------------------

2018-10-01T15:24:57Z 95535 ECSv3-fox-dell-s5148-x.x.xml

2018-10-01T15:25:24Z 84928 ECSv3-hare-dell-s5148-x.x.xml

2018-10-01T15:25:44Z 89288 ECSv3-hound-dell-s5148-x.x.xml

2018-10-01T15:26:03Z 84532 ECSv3-rabbit-dell-s5148-x.x.xml

2018-09-26T21:00:48Z 96609 startup.xml

where:

Configuration File

Switch

ECSv3-fox-dell-s5148-x.x.xml

fox - BE1

ECSv3-hare-dell-s5148-x.x.xml

hare - FE2

ECSv3-hound-dell-s5148-x.x.xml

hound - BE2

ECSv3-rabbit-dell-s5148-x.x.xml

rabbit - FE1

and

x.x

is the version number in the configuration file names.

4. Copy the correct configuration file to overwrite the existing

startup.xml

file.

In this example the fox - BE1 switch configuration file will overwrite the existing

startup.xml

file.

OS10# copy config://ECSv3-fox-dell-s5148-v1.0.xml config://startup.xml

5. Reload the switch to load in the configuration.

OS10# reload

6. If there is any messaging to save any existing configuration, type

System configuration has been modified. Save? [yes/no]:n

7. When asked to reboot the system, type

Proceed to reboot the system? [confirm yes/no]:y

8. Once the switch has rebooted, log in with the default ECS credentials (admin/

ChangeMe) to confirm the switch configuration was loaded correctly. You can
validate the ECS switch configuration files uploaded correctly if:

You could successfully log into the switch with the ECS login credentials
(admin/ChangeMe).

The switch hostname has changed from OS10 to the corresponding ECS switch
name: fox, hound, rabbit, or hare.

Bring the system online

EX300

Third-Party Rack Installation Guide

Содержание ECS EX300

























































Результаты поиска

Содержание ECS EX300

Отзывы:

Похожие инструкции для ECS EX300

Бренды по названию

Популярные бренды

Dell EMC ECS EX300, Руководство по установке

Результаты поиска

Содержание ECS EX300

Отзывы:

Похожие инструкции для ECS EX300

Бренды по названию

Популярные бренды