Dell EMC ECS EX300, Руководство по установке

Страница: 39 / 56

Note
If the service laptop or workstation does not have a serial port, you can use a USB-
to-Serial Adapter.
2. If using PuTTY, connect to an Interconnect or Administration switch.
a. Launch the PuTTY application.
3. Select Serial under the Session section.
If not using PuTTY, select Serial in Basic Options under the Session section.
4. Expand the connection section and select Serial. Verify that the settings for the
COM port are:
l
115200 Baud
l
8 data bits
l
no hardware flow control
Alternatively, if not using PuTTY, the generic serial settings are:
l
Data rate: 115200
l
Data bits: 8
l
Parity: none
l
Stop bits: 1
l
Hardware flow control: none
5. Click Open to connect.
6. Press Enter to display the login prompt.
Load the switch configuration files
1. Connect to the switch serial port as described above.
2. Log into the switch with the Dell OS10 default credentials (admin/admin).
3. Confirm all switch configuration files are present on the switch.
OS10# dir config
Directory contents for folder: config
Date (modified) Size (bytes) Name
Bring the system online
Upload the switch configuration files 39