Dell EMC ECS EX300, Руководство по установке

Страница: 50 / 56

d. Attach the arm to the lift chassis by aligning the mounting holes, pressing
the plunger, and inserting the ball lock pins into the holes. Insert the top pin
first.
Figure 19 Adjusting the arm for a low rail position
CL5441
2. Remove the rotating handle by loosening the set screw and pulling the handle
from the hex fitting.
3. Using the cordless drill that comes with the Voyager conversion kit, place the
cordless drill over the hex fitting and use the drill to raise or lower the arm to
the required height.
4. Adjust the arm of the portable lift to the approximate height of the enclosure
you intend to move.
5. Attach the tray to the lift arm.
6. Lock all four casters by pressing down on the locking tab so the lift will not roll
as the instrument is placed onto it.
Figure 20 Locking the Casters
CL5423
7. Pull the enclosure onto the lift (, and then secure the enclosure to the portable
lift using the securing straps as follows:
Mechanical lift
50 EX300 Third-Party Rack Installation Guide