
Delem
V0802, 3.3
•
Communication information
The communication information indicates the status of the serial link. The three possible states
are:
- Idle: there is no communication
- Busy: communication takes place
- Error: an error has been detected.
The following errors are reported:
- parity error
- overrun error
- framing error
The occurrence of one of these errors is indicated by a number which is displayed on the service
row. A combination is also possible. The error numbers are:
16 = parity error
32 = overrun error
64 = framing error
When a combination of errors occur the sum of the error numbers is displayed.
Example:
When a parity and an overrun error occur at the same time the error number will be 16 + 64 =
80.
code parity
overrun
framing
16 X
32
X
48 X
X
64
X
80 X
X
96
X
X
112 X
X
X
If you have an error message in the service row, check first whether the specification parameters
for serial communication are equally programmed in the control and in the connected computer.
Содержание DA-65
