Delem DA-56, Справочное руководство

Страница: 43 / 126

Delem
V0505, 3.1
3. Data preparation/Data edit
3.1. Introduction
To create a new CNC program, choose ‘Data preparation’ in the main menu.
To edit an existing CNC program, choose ‘Data edit’ in the main menu.
In both cases, a screen as shown below should appear. Programming and changing data is done
in the same way for both modes.
To edit a program that is not currently loaded, choose ‘Product selection’ in the main menu. In
the offered list, you have to select the wanted program number.
3.a
This page gives all data which are the same for every bending of the program (main data of
program).
For placing the cursor at one of the parameters. The
value entered for the selected parameter appears in the
entering field, situated in the lower left corner.
The input can be cleared for entering new input data.
Data has to be given to be able to continue program-
ming.