Delem DA-56, Справочное руководство

Страница: 34 / 126

V0505, 2.14
After pressing "unbend" the position of the bending is indicated by a small circle, see figure
2.w.
2.o
Note:
A big radius (bumping) is shown during bend sequence computation but is treated as a single
bending.
The CNC-data of the bendings necessary to produce the radius are computed during postpro-
cessing.
With this function key you can switch the collision protection check
on or off.
This is indicated at the top of the screen. When you have selected
collision "off" you can also select other bends which will give colli-
sion with the tools or machine parts.
The inner radius resulting after this bend is displayed at the top of
the screen.
To enlarge or reduce the complete drawing.