Del ozone TrioPure-25, Инструкция по установке и эксплуатации

Страница: 14 / 26

11
TrioPure
TM
Sanitation System
Step 4 - Unfasten the latch on right side of the TrioPure™
and open clear cover.
Figure 9
Figure 10
Figure 11
DEL Ozone · San Luis Obispo, CA 93401 · USA · 800-676-1335 · Fax: 805-541-8459
Step 5 - Turn the Chlorine Control knob to ‘Min’
(Counter-clockwise).
Step 6 - Switch the TrioPure™ power switch to ‘ON’ .
The model #, either 25 or 50 , will be displayed, followed by the firmware revision number.
Then the display will show the current Chlorine Control setting (S/B: “OF” )
Step 7 - Observe the color of the following status LED lights:
Ozone Production cell
TrioPure ™ -25 = O
3
Cell 1, O
3
Cell 2
TrioPure ™ -50 = O
3
Cell 1, O
3
Cell 2, O
3
Cell 3, O
3
Cell 4
Water Flow
Water Temperature
All above LEDs should be green. If any LEDs are red, please see
the Troubleshooting section, Chapter 6A for assistance.