Deister electronic proxSafe flexx, Инструкции по монтажу и подключению

Страница: 19 / 44

proxSafe flexx
V08/09/09 ps_flexx_wi_en 19
3.6 Mount keyPanels into flexx service door
1.
Position the first keyPanel in the upper part of
the inner service door and fix this keyPanel
with the supplied nut screws using a socket
wrench. Then continue in the same way until
all delivered keyPanels have been mounted
into the door. Proceed as well with blind
plates, if these are part of your delivery.
2a.
The service door should now look like this
from the inside. After having mounted all
the keyPanels into the service door, plug the
connection cable for each flexx keyPanel in
the according RJ45 connector
on the right
side of the keyPanel (also see detail picture
below).
2b.
Plug into right RJ45 connector as shown
above (white circle).
Do not use the connector on the left
side of the keyPanel!
(For further
connection of the keyPanels see 3.10
“Connect keyPanels to backplane PCB”.)