4
System Setup
SuperDVR & TD Series Cards
User Manual
40
Figure4-18 P.T.Z Protocol Setup
1. Port
Users can set serial port number.
2. Protocol
Communication protocol of P.T.Z device
3. Address
Communication address of P.T.Z device
4.7.2 Serial Ports Setup
Users should firstly enable the P.T.Z control function of a certain camera and
select a port number in P.T.Z Protocol Setup (refer to Figure4-18), and then
set corresponding parameters in the area below:
Figure4-19 P.T.Z Serial Port Setup
1. Port
Users can set port number.
2. Baud
Rate
Set P.T.Z device Baud Rate, default value is 9600.
3. Data
Bits
Default value is 8.
4. Parity
Odd and even parity bit, default Null.
5. Stop
Bits
Default value is 1.
NOTICE
Users should look into the P.T.Z device and get the Baud Rate, Protocol, and Address
first, then set their values accordingly.
