2
Hardware Installation
SuperDVR & TD Series Cards
User Manual
20
2.1.15 Alarm Board Hardware
Figure2-31 Alarm Board
Figure2-32 Pins Definition of Alarm Board
Connect J2 to PC serial port and you may use alarm board by SuperDVR
system.
2.1.16 Connect Audio Signal
For TD3004/3008/3016/3304/3116/3216/4104/4108/4408, connect the audio
input device to the microphone connector on the motherboard.
Before installing the Video Capture Card hardware in PCI port of the
motherboard, make sure you’ve installed Microsoft DirectX 9.0. Then turn on
the computer, the system will remind you to ‘Found new hardware’.
NOTICE
Just click ‘
Cancel
’ and ignore the pop-up message.
Insert the CD that contains TD series capture card driver into the CD tray, and
run Setup.exe program to install the driver. The default installation path is
‘C:\Program Files\SuperDVR’.
NOTICE
In case it warns that ‘Can’t find card’ when running the SuperDVR software, please
restart the computer.