Page 64 of
102.
Title NetVu Uniplex Appliance NVR Advanced Installation Manual
UK and EMEA: NetVu Ltd.
No 1 Thellow Heath Park, Northwich Road, Northwich, Cheshire. CW9 6JB
A tick in this box means that when movement (activity) is sensed in front of any of the selected
cameras, the recording profile will change, from Normal to Event
When the cameras are entered simply click on the Save button to enable the cameras for
MultiMode recording.
You can check that the cameras are enabled for MultiMode recording by clicking on the
Exp Editor
button at the bottom of the page
There should be a line for each camera connected to the Uniplex. Each line relates to a single
camera channel.
For example, the first line configures the Uniplex so that if activity is detected on camera 1 then for
a period of three seconds the recording of camera 1 will use the EVENT profile (REC 1 E) and then
recording for camera 1 will return to the Normal Profile (REC 1 N).
Alarm Expression Wizard
–
Example#2, Enable Camera Failure Detection on all cameras
Select the Camera Fail wizard. The following web page will then appear:
