Page 48 of
102.
Title NetVu Uniplex Appliance NVR Advanced Installation Manual
UK and EMEA: NetVu Ltd.
No 1 Thellow Heath Park, Northwich Road, Northwich, Cheshire. CW9 6JB
shown on it’s system webpage.
The authentication field allows the NVR and cameras to comply with the requirements of Secure
by Design in that all network devices should have unique access credentials (username and
password).
If the Authentication field is set to level0 then the NVR assigns a unique account to the camera,
which it will use to access it. As only the NVR “knows” the account credentials this prevents
unauthorised camera access across the network.
Consequently, the preferred setting for Authentication is level0
When you are ready, click on OK
The details entered will be displayed:
If a camera is detected at the MAC address entered then it’s IP
address will be displayed.
The channel displayed below the MAC address is the
streaming channel
.
The channel number on the NVR to be used by this camera is the
Manual Endpoint Channel.
When you are happy that everything is correct, click on
Save.
The camera will now be added to
the NVR, it will be recorded and displayed. You can check this by going to the
Camera Overview
page of the Uniplex, where the new camera should now be listed.
D
on’t forget to return the
Set Configuration Mode
to
Secure
when you are finished, so that the
cyber security features of the Uniplex are once more active.
After configuration mode has been set to secure do not forget to update the camera fail wizard
and activity wizard with the new camera details.
Manually adding cameras by using a JSON file
Rather than adding the cameras one at a time, if all of the camera details are known then they can
