Dedicated Micros EcoSense Скачать руководство пользователя страница 87

Страница: 87 / 120

oSense

OSD Settings

This menu allows the Oracle Dome OSD (On Screen Display) information to be configured. This text

will accompany displayed camera images in the Viewer and on a local monitor.

Preset Title Position

Select desired position to locate the Preset Title information.

Sector Title Position

Select desired position to locate the Sector Title information.

PTZ Display Position

Select desired position to locate the PTZ Display information.

Alarm Name Position

Select desired position to locate the Alarm Name Position

information.

For all above functions, the available positions are:

Top Left, Top Right, Bottom Left, Bottom Right and

Off (No information displayed).

All options are then split into three further sections; 1,2 and 3.

This relates to the display line i.e. Top Left 1 would be the very

top line, Top Left 2 would be the line below etc. This enables

information to be ‘stacked’ in one segment of the screen.

Engineer Display

Toggle to switch the Engineer Display text On/Off. This function is

intended for future development.

Save (Grey)

Select to store OSD Settings to the unit and the Oracle Dome

camera memory.

Содержание EcoSense

























































































































Результаты поиска

Содержание EcoSense

Отзывы:

Dedicated Micros EcoSense, Руководство по установке и эксплуатации, Страница: 87 / 120

Результаты поиска

Содержание EcoSense

Отзывы: