Dedicated Micros EcoSense Скачать руководство пользователя страница 57

Страница: 57 / 120

oSense

Alarm Settings

The Alarm Settings menus allow configuration of the unit’s alarm functionality. Individual alarm inputs

and alarm zones can be configured. Global relays can be activated and the Activity grid set up.

Refer to the individual menus for further details.

The Alarm Input page allows configuration of alarm channels. Up to 17 alarm channels are available.
The Zone Input page enables the configuration of alarm zones. Up to 32 separate alarm zones can

be created.
The Zone Actions page enables actions such as Go to Preset to be allocated to alarm zones. Zones

can also be associated with a specific camera. On receipt of an alarm, images from the associated

(primary) camera will automatically be displayed in the Viewer menu.

The Activity Setup page allowed activation and configuration of the Activity feature on all video

inputs. The Activity feature enables cameras to automatically detect any movement/changes within

the video scene. This can trigger a number of operations such as FTP alarm notification or an

increase in the recording rate.

The Activity Response page enables configuration of responses following an Activity

Detection trigger.
The Global Relays page allows the four onboard relay connections and global relay settings to be

configured.

Содержание EcoSense

























































































































Результаты поиска

Содержание EcoSense

Отзывы:

Dedicated Micros EcoSense, Руководство по установке и эксплуатации, Страница: 57 / 120

Результаты поиска

Содержание EcoSense

Отзывы: