Dedicated Micros EcoSense Скачать руководство пользователя страница 22

Страница: 22 / 120

oSense

Using a USB Mouse or the Webpages

Navigate the menus by clicking the tabs displayed on the left of the menu headings (on the menu

tree). The first option is highlighted with a red tab. Select a main menu heading to open a drop down

list of further sub-options.
Highlight an editable field by clicking on it directly.
If viewing pages locally, enter alpha numeric data via the Arrow Key Editor (see above). If viewing

remotely, enter via the PC keyboard. If available, click on the drop down menus to select settings.

Note:

A selected item in the drop down list will appear highlighted.

Navigating away from a page (clicking on a different option on the menu tree) will automatically save

any changed settings. To undo changes made to any menu, select the Refresh (Purple) option.

Using a Supported Dedicated Micros Keyboards (DM/KBC1 & DM/KBC2)

The unit can also be controlled using an optional Dedicated Micros keyboard (except the 4 way

unit). This is connected via the KBD connector on the rear of the unit and provides the same control

functions as the I.R Remote Control.

Note:

Refer to ‘Using the optional Keyboards (DM/KBC1 & DM/KBC2)’ for further guidance.

Содержание EcoSense

























































































































Результаты поиска

Содержание EcoSense

Отзывы:

Dedicated Micros EcoSense, Руководство по установке и эксплуатации, Страница: 22 / 120

Результаты поиска

Содержание EcoSense

Отзывы: