Dedicated Micros EcoSense, Руководство по установке и эксплуатации, Страница: 63 / 120

Dedicated Micros ©2009
Ec
oSense
Add Still Image This will record a still image of the trigger along with the standard
recording. This can then be sent on to an external destination.
Email Image If this option is selected, a JPEG will be added to the reporting
email (if Email Reporting is selected).
Protect alarm Images Alarm images can automatically be protected from
being overwritten.
Switch Spot Monitor Select to display the alarm zone Primary camera on the Spot
Monitor.
Goto Preset It is possible to action a camera to automatically be sent to a
preset position when an alarm is triggered.
Email Reporting The unit can send an email when an alarm is detected, refer to
‘Network-E-mail’ for more information.
VMD/Activity Inhibit Select to inhibit (ignore) the Activity detection feature. Refer to
‘Activity Setup’ for more information.
Enable Buzzer Select to activate the unit’s internal buzzer upon alarm receipt.
Preset Camera The preset camera is the camera which will be sent to a
designated preset position upon alarm activation.
Preset Enter the preset position number for the selected camera here,
refer to ‘Unit Operation-PTZ Program’ for more information on
establishing camera preset positions.
Relay Select an onboard or external relay to automatically close on
receipt of an alarm.
Relay Duration Enter (in seconds) how long the relay is to remain closed.
Alarm Image Snapshot Delay This figure allows a delay to be introduced before an alarm
snapshot is taken. This is used when the alarm relates to a PTZ
camera which has to travel to a preset position.