Dedicated Micros EcoSense Скачать руководство пользователя страница 52

Страница: 52 / 120

oSense

Schedule

This menu allows the Schedule function to be configured. This enables the unit to automatically be

put into set/unset mode at specific times on specific days. This can help reduce unnecessary

alarm triggers.
When the unit is in Set or Unset mode, combine with different recording qualities and rates under

normal and alarm conditions for a high degree of control in a range of situations.

Note:

If Keyswitch is Enabled, the Day Time and Night Time options will not be displayed. The

additional Keyswitch options will instead be displayed.

Mode/Title

Enables a name to be entered for Unset, Set and Override mode.

Current Mode

Shows the current timer mode according to the names entered in

the Mode/Title text boxes.

Day Time

Enter the time (using the 24hr clock) when Unset mode will begin.

Night TIme

Enter the time (using the 24hr clock) when Set mode will begin.

Keyswitch

A Keyswitch can be used to switch the recording profile (Unset/

Set).

Note:

When the Keyswitch option is set to ‘Enabled’. It is necessary to save (or exit and return to)

the menu. The additional Keyswitch options will then be displayed.

Enable-N/O

Select if the Keyswitch is to be normally open (UNSET). Then

choose a contact to be used in a specific zone as the Keyswitch.

Содержание EcoSense

























































































































Результаты поиска

Содержание EcoSense

Отзывы:

Dedicated Micros EcoSense, Руководство по установке и эксплуатации, Страница: 52 / 120

Результаты поиска

Содержание EcoSense

Отзывы: