Dedicated Micros EcoSense Скачать руководство пользователя страница 77

Страница: 77 / 120

oSense

Download options

Select one of the following options from the drop down menu:

On Connection

This will automatically start the Archive

download when the unit detects the

archive destination is present.

Scheduled

It is possible to force the unit to archive

images at a scheduled time, enter a

time to activate this function each day.

Polled

This will set the unit to activate archive

download at regular intervals, the

time is in minutes and is the period

between the end of one archive

download and the start of the next.

Manual only

The archive process will only

commence when the user initiates the

action.

Schedule time hh mm

If ‘Scheduled’ has been selected in Download Options, enter

a time for the download to take place each day.

Poll time Minutes

If ‘Polled’ has been selected in Download Options, enter the

number of minutes which will elapse between the conclusion

of one archive download and the start of the next.

Clear video protection after download This automatically clears the image protection from

successfully downloaded images.

Watermark each partition

This enables a watermark to be generated and stored in a

text file downloaded with the video to the FTP server (for

each image partition). This watermark is logged in the

log file.

FTP download overrides Powermanager

When selected, if the unit is in the process of an FTP

download and the unit is sent into reset, the reset will

not begin under the FTP process has completed.

Содержание EcoSense

























































































































Результаты поиска

Содержание EcoSense

Отзывы:

Dedicated Micros EcoSense, Руководство по установке и эксплуатации, Страница: 77 / 120

Результаты поиска

Содержание EcoSense

Отзывы: